Garage door won't close: sensor repair in North Caldwell

A door that starts down and comes straight back up is nearly always telling you about its safety sensors.

Call (862) 314-5003

In short

If the garage door starts to close and comes back up, or the opener light blinks, the safety sensors near the floor are usually misaligned, dirty or have a damaged wire. Wipe the lenses and check both lights are steady; if it still won't close, a technician in North Caldwell realigns or replaces the sensors and tests the safety reverse.

Wi-Fi garage door opener mounted on the ceiling

Doors that won't close in North Caldwell

North Caldwell is hilly and wooded, on the Watchung ridge. Along Mountain Avenue and on the ridge-top streets, steep driveways send rain, meltwater, sand and leaves down to garages that often sit below street level, and the sensors are the first thing they reach. Around Green Brook and Gould Avenue, large newer homes have three and four bays, with the least-used door gathering webs. In the townhouse communities, garages are compact and the beam is blocked by bins and strollers. West-facing doors on the ridge get strong late sun. Wildlife from the surrounding woods accounts for the occasional chewed wire.

Why a garage door refuses to close

  • Door starts down, then goes back up. Something is blocking, or seems to be blocking, the two safety sensors near the floor.
  • Opener light blinks and the door stays open. The sensors have lost sight of each other: a bumped bracket, a dirty lens or a broken wire.
  • Door closes only if you hold the wall button. That is the opener overriding its sensors. It tells you the sensors are the problem, and it is not a way to run the door day to day.
  • Door closes, touches the floor and reopens. The travel or force setting is off, or the floor has heaved and the door thinks it hit something.

What you can safely try yourself

Clear the doorway, clean both sensor lenses, and check that the two sensors point at each other at the same height. A steady light on each side means they can see each other. If one keeps blinking after that, or the wires look damaged, leave it for the technician.

Never disconnect the sensors or move them up out of the doorway to get the door working. They are what stops the door from closing on a child, a pet or a car.

What the technician does

  1. Checks power and wiring to both sensors and repairs any break.
  2. Realigns the sensors, or replaces the pair if one has failed.
  3. Resets the open and close travel so the door seals without straining.
  4. Tests the automatic reverse on an object in the doorway and with the beam blocked.

Around North Caldwell

  • Gould Avenue area: Near the schools and borough hall, with family homes.
  • Townhouse communities: A pair of developments with attached garages under association rules.

See the full North Caldwell service area.

Door stuck? Call before you try to force it.

Springs and cables hold a lot of tension. Don't lift the door by hand or keep pressing the opener; call and we'll book a technician.

Call (862) 314-5003
Call (862) 314-5003